15Amp 125V AC 60Hz GFCI Outlet, Self-Test UL/Cul Listed E504391 Black Color, Tamper Resistant & Weather Resistant, Standard/Screwless Wallplate Optional, UL943 5th Edition /UL498 /UL1998
Self-Test
■ GFCI shall automatically conduct self-test every 15 minutes to ensure continuous protection.
■ Auto-monitoring exceeds the UL requirement UL943 2018 version.
■ On initial power up, tests the GFCI within 3 seconds.
■ Enhanced Service Life led indicator lamp integrates two-color function: Green/Red.
■ Strong anti-interference design.
■ Enhanced Service Life led indicator lamp integrates two-color function: Green/Red.
1.Trip threshold meets or exceeds UL requirements for tripping time.
2.UL Standard 943 Class A & UL498 for Receptacle.
3.Advanced electronics design provides superior resistance to electrical surges and over-voltages.
4.Standard copper parts are integrated stamping one-piece design to ensure stable work.
5.TEST and RESET button colors match device face (Red & blue buttons optional).
6.Standard thickness silver contacts ensure good contact.
7.Three colors led indicator light provides simple, intuitive feedback on power and protection status.
8.If the GFCI installed in correct wiring, the automatic detection function detects once within 3 seconds once power-on, and the red indicator flashes once in each internal detection cycle. Green led indicator will on once GFCI been reset, and the receptacle get power.
9.Please replace the GFCI if the red led indicator on and can not reset.
10.Side or internal screw-pressure-plate back wire with #10-#14 AWG solid or stranded copper wire.
11.Auto-Ground clip assures a positive ground to metal box.
If line/load reversed, the Green led indicator will on before GFCI been Reset, no power will be delivered to receptacle face.
The receptacle blocks access to the contacts unless a two- or three-prong plug is inserted.
Complies with NEC® requirement mandating that all 15A and 20A receptacles installed in dwelling units be listed as tamper-resistant. Following items with tamper-resistant shutter mechanism inside:
GT15/GT20
GW15/GW20
GTN15/GTN20
UV stabilized plastics
Designed for wet and damp locations which meet the requirements of NEC Section 406.8 Tamper-Resistant shutter mechanism inside.
Please use waterproof box when GFCI installed nearby water being directly polluted.
GW15/GW20
Item: GW15 |
|
Electrical Specifications |
|
Dielectric Voltage |
Withstands 1250VAC per UL 943 |
Self Testing |
Yes |
Amperage |
15 Amp |
Voltage |
125 VAC |
Power Frequency |
60 Hz |
Pole |
2 |
Wire |
3 |
Grounding |
Self Grounding With Grounding Clip |
Short Circuit Current Rating |
10KA |
Trip Level |
Class A, 6mA plus or minus 4mA |
Trip Time |
<25ms |
Material Specifications |
|
Body Material |
PC-Thermoplastic Flammability UL-94 V2 Rating |
Face Material |
PC-Thermoplastic Flammability UL-94 V2 Rating |
Terminal Screws |
Plated Steel |
Grounding Screw |
Plated Steel |
Clamps |
Brass |
Line Contacts |
Brass |
Yoke |
Zinc-Plated Steel |
Shutter Mechanism |
Thermoplastic & Acetal |
Mechanical Specifications |
|
Terminal ID |
Brass-Hot, Green-Ground, Silver-Neutral |
Terminal Accom |
14-12 AWG |
Product ID |
Ratings Are Permanently Marked On Device |
Tamper Resistant&Weather Resistant |
Yes |
Termination |
Back & Side |
Environmental Specifications |
Operating Temperature: -35℃ to +66℃ |
Standards and Certifications |
|
NEMA |
5-15R |
Applicable Standards |
UL/CUL UL498/UL943 5th Edition |
Warranty |
2-Years Limited |
Grade |
Residential/Commercial Specification Grade |